README.md

@@ -1,8 +1,8 @@
 # Stelloauth for Home Assistant
 
-En Home Assistant-app (tidligere kaldet add-on), som kører Stelloauth og
+A Home Assistant app (formerly known as an add-on) that runs Stelloauth and
-CloakBrowser lokalt til OAuth-opsætning af integrationen Stellantis Vehicles.
+CloakBrowser locally for OAuth setup of the Stellantis Vehicles integration.
-Repositoryet understøtter `amd64` og `aarch64`.
+The repository supports `amd64` and `aarch64`.
 
 ```text
 Home Assistant Core
@@ -10,45 +10,49 @@ Home Assistant Core
         | POST http://0031621f-stelloauth:8080/worker
         v
 +--------------------------------------------------+
-| Én app / én container                            |
+| One app / one container                          |
 |                                                  |
-|  Stelloauth 0.0.0.0:8080                        |
+|  Stelloauth 0.0.0.0:8080                         |
 |          |                                       |
 |          | CDP http://127.0.0.1:9222             |
 |          v                                       |
-|  CloakBrowser 127.0.0.1:9222                    |
+|  CloakBrowser 127.0.0.1:9222                     |
 +--------------------------------------------------+
 ```
 
-Én app giver de to processer samme Supervisor-livscyklus og holder
+Running both processes in one app gives them the same Supervisor lifecycle and
-CloakBrowsers CDP-port på containerens loopback-interface. Appen bygges
+keeps CloakBrowser's CDP port on the container's loopback interface. The app
-lokalt fra kilde, fordi CloakBrowser Binary License ikke tillader, at dette
+builds locally from source because the CloakBrowser Binary License does not
-repository genudgiver en afledt image med den proprietære CloakBrowser-binær.
+allow this repository to redistribute a derived image containing the
-Der publiceres derfor ingen prebuilt images.
+proprietary CloakBrowser binary. No prebuilt images are published.
 
 ## Installation
 
-1. Gå til **Indstillinger → Apps → Installér app → ⋮ → Repositorier**, og tilføj
+1. Go to **Settings → Apps → Install app → ⋮ → Repositories** and add
    `https://git.radixadm.dk/dennis/homeassistant-stelloauth-addon.git`.
-2. Installér **Stelloauth**, aktivér **Start ved opstart** og **Watchdog**, og
+2. Install **Stelloauth**, enable **Start on boot** and **Watchdog**, then start
-   start appen.
+   the app.
-3. Følg den fulde vejledning i [stelloauth/DOCS.md](stelloauth/DOCS.md).
+3. Follow the complete guide in [stelloauth/DOCS.md](stelloauth/DOCS.md).
 
-## Fastlåste upstream-kilder
+When the integration asks for a security PIN, enter the four-digit PIN you
+chose when activating Remote Control in the MyOpel app. MyOpel does not send
+you a new PIN; the SMS verification code is separate.
 
-| Komponent | Version | Commit / OCI index digest |
+## Pinned upstream sources
+
+| Component | Version | Commit / OCI index digest |
 | --- | --- | --- |
 | Stelloauth | `v0.6.0` | `367d4f8c02a3b072c59142c49dffc129edc8548b` |
 | Stelloauth image contract | `v0.6.0` | `sha256:51b2194ec9b80cc484d11c016ec5436a12161277a493afdab7078959966d5aa9` |
 | CloakBrowser | `0.5.10` | `f04c23da285b3b3d3cf10c8f9d282e7adc1d52ce` / `sha256:2ed5b2d047cbdde22cde7ef1a796526c716aadaa5bccbe1db5ade49282b64a76` |
-| Go-builder | `1.27.1-bookworm` | `sha256:69a7b9788769bec032d238959b61854e9ae87f57be9029ec04e9885fabf99195` |
+| Go builder | `1.27.1-bookworm` | `sha256:69a7b9788769bec032d238959b61854e9ae87f57be9029ec04e9885fabf99195` |
 | Stellantis Vehicles | `2026.9.4` | `9e0ef96f8fe478af291da4c38c923ada78d0ebf6` |
 
-Dockerfile og patches er build-opskriften. Supervisor henter det officielle
+The Dockerfile and patches define the build. Supervisor downloads the official
-CloakBrowser-image og bygger alene et lokalt image til intern brug.
+CloakBrowser image and builds a local image for internal use only.
 
-## Licens
+## License
 
-Repositoryets eget arbejde er MIT-licenseret; se [LICENSE](LICENSE). Dette
+The repository's original work is licensed under the MIT License; see
-omfatter ikke CloakBrowsers proprietære binær. Den er fortsat omfattet af den
+[LICENSE](LICENSE). The proprietary CloakBrowser binary is not included. It
-separate **CloakBrowser Binary License** og redistribueres ikke af repositoryet.
+remains subject to the separate **CloakBrowser Binary License**.

stelloauth/CHANGELOG.md

@@ -2,10 +2,11 @@
 
 ## 0.1.0
 
-- Fastlåser Stelloauth `v0.6.0` og CloakBrowser `0.5.10` til verificerede
+- Pin Stelloauth `v0.6.0` and CloakBrowser `0.5.10` to verified commits and
-  commits og OCI-digests.
+  OCI digests.
-- Tilføjer fælles procesovervågning, readiness, watchdog og begrænset shutdown.
+- Add shared process supervision, readiness checks, watchdog support, and a
-- Dokumenterer intern Login service URL:
+  bounded shutdown.
+- Document the internal Login service URL:
   `http://0031621f-stelloauth:8080/worker`.
-- Begrænser CDP til loopback og hardener URL-validering, request-størrelse,
+- Restrict CDP to loopback and harden URL validation, request size limits,
-  rate limiting og logredigering.
+  rate limiting, and log redaction.

stelloauth/DOCS.md

@@ -1,15 +1,15 @@
-# Installation og drift
+# Installation and operation
 
-1. Gå til **Indstillinger → Apps → Installér app → ⋮ → Repositorier**, og tilføj
+1. Go to **Settings → Apps → Install app → ⋮ → Repositories** and add this
-   præcis
+   exact URL:
    `https://git.radixadm.dk/dennis/homeassistant-stelloauth-addon.git`.
 
-2. Installér **Stelloauth**, aktivér **Start ved opstart** og **Watchdog**, og
+2. Install **Stelloauth**, enable **Start on boot** and **Watchdog**, then start
-   start derefter appen. Installationen bygger et lokalt image fra kilde til
+   the app. Home Assistant builds a local image from source for the selected
-   den valgte `amd64`- eller `aarch64`-arkitektur. Repositoryet publicerer ikke
+   `amd64` or `aarch64` architecture. This repository does not publish a
-   et prebuilt image.
+   prebuilt image.
 
-3. Vent, til loggen i denne rækkefølge viser de fem faste readiness-beskeder:
+3. Wait for the app log to show these five readiness messages in order:
 
    ```text
    Cleaning CloakBrowser profiles
@@ -19,72 +19,76 @@
    Stelloauth listening on 0.0.0.0:8080
    ```
 
-4. Behold host-porten deaktiveret i normal drift. Ved kortvarig fejlfinding kan
+4. Keep the host port disabled during normal operation. For brief
-   `8080/tcp` tilknyttes host-port `8080`. Kontrollér derefter
+   troubleshooting, map `8080/tcp` to host port `8080`. Then check
-   `http://192.168.1.20:8080/` eller worker-endpointet
+   `http://192.168.1.20:8080/` or the worker endpoint at
-   `http://192.168.1.20:8080/worker`, og **deaktivér porttilknytningen igen**,
+   `http://192.168.1.20:8080/worker`. **Disable the port mapping again** when
-   når kontrollen er færdig. Worker-endpointet modtager MyOpel-oplysninger og
+   you finish. The worker endpoint receives MyOpel details and has no separate
-   har ingen egen autentificering.
+   authentication.
 
-5. Åbn konfigurationen af **Stellantis Vehicles**. Angiv præcis
+5. Open the **Stellantis Vehicles** integration's configuration and set
-   `http://0031621f-stelloauth:8080/worker` som **Login service URL**.
+   **Login service URL** to exactly
-   Integrationen tilføjer ikke `/worker`; hele stien skal derfor stå i feltet.
+   `http://0031621f-stelloauth:8080/worker`. The integration does not append
+   `/worker`, so include the full path.
 
-6. Vælg **Brand: Opel** og **Country: DK**, og gennemfør derefter integrationens
+6. Select **Brand: Opel** and **Country: DK**, then complete the integration's
-   OAuth-opsætning med dine MyOpel-oplysninger.
+   OAuth setup with your MyOpel details.
 
-7. Appens tre muligheder er:
+   When asked for a security PIN, enter the four-digit PIN you chose when
+   activating Remote Control in the MyOpel app. Do not wait for MyOpel to send
+   you a new PIN; the SMS verification code is separate.
 
-   - `queue_timeout`: hvor længe et loginforsøg må vente på den ene session.
+7. The app provides three options:
-   - `rate_limit_count`: højeste antal loginforsøg i hver periode.
-   - `rate_limit_duration`: længden af rate limit-perioden.
 
-   `CLOAK_MAX_SESSIONS` er fastlåst til én session, fordi CloakBrowsers gratis
+   - `queue_timeout`: how long a login attempt may wait for the single session.
-   niveau tillader ét samtidigt login. Samtidige forsøg bliver derfor køet.
+   - `rate_limit_count`: the maximum number of login attempts allowed in each
+     period.
+   - `rate_limit_duration`: the length of the login rate-limit period.
 
-8. Hvert OAuth-forsøg får en midlertidig profil under `/tmp/cloakserve`.
+   `CLOAK_MAX_SESSIONS` is fixed at one because CloakBrowser's free tier allows
-   CloakBrowser rydder inaktive browserprocesser efter 30 sekunder, og
+   one concurrent login. Additional attempts wait in the queue.
-   process manageren rydder gamle profiler ved opstart. Credentials, cookies,
-   tokens og OAuth-koder gemmes ikke i `/data`. CDP lytter kun på loopback
-   `127.0.0.1:9222`, og logs bruger faste, redigerede hændelser uden email,
-   passwords, URLs, koder eller tokens.
 
-9. De målte resultater fra den reelle `linux/amd64`-kørsel under Rosetta var:
+8. Each OAuth attempt gets a temporary profile under `/tmp/cloakserve`.
+   CloakBrowser removes inactive browser processes after 30 seconds, and the
+   process manager removes old profiles at startup. Credentials, cookies,
+   tokens, and OAuth codes are not stored in `/data`. CDP listens only on the
+   loopback address `127.0.0.1:9222`. Logs use fixed, redacted messages and do
+   not include email addresses, passwords, URLs, codes, or tokens.
 
-   - Image: 2,571,693,650 bytes (2.571 GB decimal / 2452.56 MiB).
+9. Measurements from a real `linux/amd64` run under Rosetta:
-   - Dokumenteret Task 4-måling: 121,5 MiB.
-   - Stop: cirka 9.3 sekunder.
-   - `amd64` runtime bestod under Rosetta; `aarch64` build bestod.
-   - Mål-HAOS havde ved inspektionen approximately 4 GB free. Den knappe
-     plads sammenholdt med image- og build-lag kan forhindre installationen;
-     frigør plads først. Der er ikke verificeret en vellykket HAOS-installation.
 
-   Der er ikke gennemført et live MyOpel-login.
+   - Image: 2,571,693,650 bytes (2.571 GB decimal / 2,452.56 MiB).
-   Login-flow RAM: not measured without real MyOpel credentials.
+   - Documented Task 4 measurement: 121.5 MiB.
+   - Stop time: about 9.3 seconds.
+   - The `amd64` runtime passed under Rosetta; the `aarch64` build passed.
 
-10. Fejlfinding og fjernelse:
+10. Troubleshooting and removal:
 
-    - Mangler en readiness-besked, så se efter timeout: CloakBrowser har 60
+    - If a readiness message is missing, check for a timeout. CloakBrowser has
-      sekunder og Stelloauth 30 sekunder. Ret årsagen og genstart appen.
+      60 seconds and Stelloauth has 30 seconds. Fix the cause, then restart the
-    - Et ugyldigt eller ikke-tilladt authorize-URL giver HTTP `400`.
+      app.
-    - For mange loginforsøg giver HTTP `429`; vent den konfigurerede periode.
+    - An invalid or disallowed authorize URL returns HTTP `400`.
-    - Hvis repository-URL eller hostname ændres, ændres Supervisor-repository-ID
+    - Too many login attempts return HTTP `429`; wait for the configured
-      og dermed `0031621f-stelloauth`. Beregn og brug den nye interne URL.
+      rate-limit period.
-    - Ved disk pressure: kontrollér fri plads og fjern unødvendige images eller
+    - If the repository URL or hostname changes, the Supervisor repository ID
-      backups via de normale Supervisor-funktioner før et nyt build.
+      and `0031621f-stelloauth` hostname also change. Calculate and use the new
-    - Hvis den interne URL ikke kan nås, brug kun den midlertidige portkontrol
+      internal URL.
-      fra trin 4 og deaktivér porttilknytningen bagefter.
+    - If disk space is low, check available space and remove unneeded images or
-    - Fjernelse sker i **Indstillinger → Apps → Stelloauth → Afinstallér**.
+      backups through Supervisor before building again.
-      Supervisor stopper containeren og fjerner appens lokale data. Fjern også
+    - If the internal URL cannot be reached, use the temporary port check from
-      repositoryet via **Indstillinger → Apps → Installér app → ⋮ →
+      step 4, then disable the port mapping again.
-      Repositorier**, hvis det ikke længere bruges.
+    - To remove the app, go to **Settings → Apps → Stelloauth → Uninstall**.
+      Supervisor stops the container and removes the app's local data. If you
+      no longer need the repository, remove it from **Settings → Apps → Install
+      app → ⋮ → Repositories** as well.
 
-## Kilder og licenser
+## Sources and licenses
 
-App-version `0.1.0` bygger Stelloauth `v0.6.0` fra commit
+App version `0.1.0` builds Stelloauth `v0.6.0` from commit
-`367d4f8c02a3b072c59142c49dffc129edc8548b` og bruger det officielle
+`367d4f8c02a3b072c59142c49dffc129edc8548b` and uses the official CloakBrowser
-CloakBrowser `0.5.10`-image ved OCI index digest
+`0.5.10` image at OCI index digest
 `sha256:2ed5b2d047cbdde22cde7ef1a796526c716aadaa5bccbe1db5ade49282b64a76`.
-Repositoryets egne filer og patches er MIT-licenserede. CloakBrowsers
+The repository's original files and patches are licensed under the MIT License.
-proprietære binær er fortsat under den separate **CloakBrowser Binary License**;
+The proprietary CloakBrowser binary remains subject to the separate
-den er ikke MIT-licenseret eller redistribueret af dette repository.
+**CloakBrowser Binary License**. It is not licensed under MIT or redistributed
+by this repository.

stelloauth/README.md

@@ -1,10 +1,10 @@
 # Stelloauth
 
-Lokal OAuth-worker til integrationen Stellantis Vehicles. Appen bygger
+A local OAuth worker for the Stellantis Vehicles integration. This app builds
-Stelloauth `v0.6.0` og CloakBrowser `0.5.10` lokalt, understøtter `amd64` og
+Stelloauth `v0.6.0` and CloakBrowser `0.5.10` locally, supports `amd64` and
-`aarch64` og eksponerer som standard ingen host-port.
+`aarch64`, and exposes no host port by default.
 
-Se [den fulde installations- og fejlfindingsvejledning](DOCS.md).
+See the [installation and troubleshooting guide](DOCS.md).
 
-CloakBrowsers binær er under den separate CloakBrowser Binary License og er
+The CloakBrowser binary is covered by the separate CloakBrowser Binary License,
-ikke omfattet af repositoryets MIT-licens.
+not by this repository's MIT License.

stelloauth/translations/da.yaml

@@ -1,10 +1,10 @@
 configuration:
   queue_timeout:
-    name: Køventetid
+    name: Queue timeout
-    description: Angiver hvor længe et loginforsøg må vente i køen.
+    description: Sets how long a login attempt may wait in the queue.
   rate_limit_count:
-    name: Loginforsøg
+    name: Login attempts
-    description: Angiver det maksimale antal loginforsøg i hver periode.
+    description: Sets the maximum number of login attempts in each period.
   rate_limit_duration:
-    name: Rate limit-periode
+    name: Rate limit period
-    description: Angiver periodens længde for begrænsning af loginforsøg.
+    description: Sets the length of the login attempt rate-limit period.

stelloauth/translations/en.yaml

@@ -7,4 +7,4 @@ configuration:
     description: Sets the maximum number of login attempts in each period.
   rate_limit_duration:
     name: Rate limit period
-    description: Sets the length of the login attempt rate limit period.
+    description: Sets the length of the login attempt rate-limit period.

tests/test_addon_metadata.py

@@ -55,51 +55,51 @@ def test_user_guide_documentation_contract() -> None:
     documentation = (ROOT / "stelloauth/DOCS.md").read_text(encoding="utf-8")
     for required_text in (
         REPOSITORY_URL,
-        "Indstillinger → Apps → Installér app → ⋮ →",
+        "Settings → Apps → Install app → ⋮ → Repositories",
-        "Installér **Stelloauth**",
+        "Install **Stelloauth**",
-        "aktivér **Start ved opstart** og **Watchdog**",
+        "enable **Start on boot** and **Watchdog**",
         "http://0031621f-stelloauth:8080/worker",
         "http://192.168.1.20:8080/worker",
         "Brand: Opel",
         "Country: DK",
-        "Image: 2,571,693,650 bytes (2.571 GB decimal / 2452.56 MiB).",
+        "Image: 2,571,693,650 bytes (2.571 GB decimal / 2,452.56 MiB).",
-        "Dokumenteret Task 4-måling: 121,5 MiB.",
+        "Documented Task 4 measurement: 121.5 MiB.",
-        "Stop: cirka 9.3 sekunder.",
+        "Stop time: about 9.3 seconds.",
-        "approximately 4 GB free",
+        "**Settings → Apps → Stelloauth → Uninstall**",
-        "Der er ikke gennemført et live MyOpel-login.",
-        "Login-flow RAM: not measured without real MyOpel credentials.",
-        "Fjernelse sker i **Indstillinger → Apps → Stelloauth → Afinstallér**.",
     ):
         assert required_text in documentation
-    assert "deaktivér porttilknytningen igen" in documentation
+    assert "Disable the port mapping again" in documentation
-    assert "Seneste idle RAM" not in documentation
+    assert "approximately 4 GB free" not in documentation
-    assert "Tilføjelser" not in documentation
+    assert "successful HAOS installation has not been verified" not in documentation
-    assert "Tilføjelsesbutik" not in documentation
 
 
 def test_root_readme_repository_source_and_license_facts() -> None:
     readme = (ROOT / "README.md").read_text(encoding="utf-8")
     for required_text in (
         REPOSITORY_URL,
-        "Indstillinger → Apps → Installér app → ⋮ → Repositorier",
+        "Settings → Apps → Install app → ⋮ → Repositories",
         "v0.6.0",
         "367d4f8c02a3b072c59142c49dffc129edc8548b",
         "0.5.10",
         "f04c23da285b3b3d3cf10c8f9d282e7adc1d52ce",
         "CloakBrowser Binary License",
-        "MIT-licenseret",
+        "licensed under the MIT License",
     ):
         assert required_text in readme
-    assert "Tilføjelsesbutik" not in readme
+    assert "Indstillinger" not in readme
+    assert "Installér" not in readme
 
 def test_translations_cover_every_option() -> None:
     keys = set(load_yaml("stelloauth/config.yaml")["options"])
+    translations = {}
     for language in ("da", "en"):
         translation = load_yaml(f"stelloauth/translations/{language}.yaml")
         assert set(translation["configuration"]) == keys
+        translations[language] = translation["configuration"]
         for entry in translation["configuration"].values():
             assert set(entry) == {"name", "description"}
             assert all(isinstance(value, str) and value.strip() for value in entry.values())
+    assert translations["da"] == translations["en"]
 
 
 def test_dockerfile_uses_approved_pins_and_builds_patched_stelloauth() -> None: